• <dd id="bsuyh"></dd>

          <progress id="bsuyh"><track id="bsuyh"></track></progress>
            <progress id="bsuyh"><pre id="bsuyh"></pre></progress>

            <button id="bsuyh"><acronym id="bsuyh"></acronym></button>
            <dd id="bsuyh"></dd>
          1. Google Search for this blog

            Title Ad

            Showing posts with label Videos. Show all posts
            Showing posts with label Videos. Show all posts

            Saturday, January 30, 2016

            How to scan data from a chart or graph by DigitizeIt software?

            If you are to get the raw data from a given graph or chart, you can use DigitizeIt software. This video shows you step by step method to get the X and Y data points.



            Friday, January 8, 2016

            Dos and Donts in GATE examination

            If you are going to appear for the GATE examination, you should view this video carefully. It is full of information taken from the experience of other people.

            How to choose final year project topic in any branch of engineering ?

            This article is all about choosing the right final year project topic in mechanical engineering. Watch the complete video to get the idea of the final year project topic.





            Top five software mechanical engineer should know or learn

            Are you studying in mechanical engineer? Being an engineer, you should have some useful software knowledge to get things done easily. View this video to get top five software which are very useful to mechanical engineers.

            NPCIL Technical Interview Questions for Mechanical Engineering

            This article gives technical interview questions which were asked during NPCIL interview.


            Eccentric machining operation on lathe machine

            This video shows the eccentric machining of copper plate. Big size hole are created by drill and followed by boring operation.



            How to cut wire mesh of any size by turning operation on lathe?

            Cutting SS wire mesh or copper wire mesh for regenerator of any cryocooler require very careful machining. The accurate sized mesh can be cut by holding the mesh which is in raw material into the headstock and tailstock with support of wooden piece. The turning of it gives required size mesh. 



            How to do sliver brazing of stainless steel and copper material?

            The brazing of dissimilar metal is shown in this video. It shows the silver brazing to join the Stainless steel SS 304 tube of 0.4 mm diameter with 22 mm thick copper plate. The silver rod is used as filler material. The required temperature for proper silver brazing is 800 to 900 degree C. Both parts to be brazed needs to be at the required temperature to have proper capillary action which fills the gap between the parts to be brazed.


            Wednesday, September 23, 2015

            How to change dimension text height and arrow size in AutoCAD 2015 ?

            If you using AutoCAD and want to change the text height and arrow size for drawing, view this video.


            Wednesday, July 22, 2015

            How to select object in AutoCAD 2015 with two options?

            The latest version of AutoCAD comes with two options to select the drawing. View this video to know it.

             

            Tuesday, August 19, 2014

            Tuesday, October 2, 2012

            Bourbon type pressure gauge - Mechanical Engineering video

            This is one of the simple form of pressure measurement which is of analog type. It consists of a tube connected with source whose pressure is to be measured. Second blind end of tube is connected with rack-pinion arrangement which is again connected with pointer. As the pressure changes in source, corresponding deflections is seen on rack and pinion arrangement corresponding to the change of pressure. This is equally see on pointer. 


            -->

            Wednesday, September 5, 2012

            Mechanical Engineering Videos : Anemometer for air velocity measurement

            This video shows how an anemometer measures air velocity. This anemometer is of analog meter which gives the total linear distance that rotor moves during a prescribed amount of time. One needs to see the pointer movement and have to record the time. The division of linear movement of air and time gives the average velocity of air. 

            Wednesday, June 13, 2012

            Heat and mass transfer - NPTEL Video lectures from Dr. S P Sukhatme

            In every mechanical engineering curriculum, heat and mass transfer is an important subject for each student of mechanical engineering. As a mechanical engineer, one should be familiar with the following basic subjects:

            1. Solid Mechanics (Engineering Mechanics + Strength of Materials)
            2. Fluid Mechanics
            3. Thermodynamics
            4. Heat and mass transfer
            5. Machine Dynamics and kinematics

            One should be very clear in all those subjects to know another subject very well.

            In the classroom, every faculty/teacher tries hard to explain every detail but it depends on faculty to faculty. To get and share knowledge from IIT professor, MHRD started NPTEL (National Program on Technology Enhanced Learning) which records and provides all subject's video lectures from different IIT professors,

            Here, I am presenting with you such a video lecture series, i.e. 'Heat and mass transfer' by Dr. S P Sukhatme from IIT Bombay.


            Heat and Mass Transfer Video Lectures

            来真钱的麻将游戏